Advantage 1: Using hydraulic roof and roof to solve the problem of poor positioning, and fast positioning, only about 10 seconds can be vertical flat and fixed.
_Advantage 2: The problem of slow laser positioning, difficult positioning and large error is solved by combining two supports with traditional dotting.
Advantage 3: Use the conveyor belt to convey ash forward and upward to combine with the big wiper board which can change the angle, completely wipe to the top, not leaving a millimeter.
_Advantage 4: Using vibrator to enlarge the plastering board to solve the problem that the artificial plastering wall is prone to empty drum and crack. The maximum plastering thickness can reach 3 centimeters on the absorbent wall and the minimum plastering thickness is 0.3 centimeters.
Advantage 5: The problem that the machine can't descend calendering along the original road is solved by using the eraser which can change the angle.
Advantage 6: It is more convenient for you to connect freely at different heights by using pull-out plug, and it also solves the problem that the expansion rod can not pass through the construction hole. Moreover, when the machine goes to the construction site, it can be used by inserting the vertical rod without assembly. It can be transported without disassembly.
Advantage 7: The conveyor belt of the machine can stop alone, for example, after the construction surface and then send ash, it can wipe the construction surface above.
Advantages 8: At least the machine side is only 60 cm wide and 98 kilograms heavy, so even the small bathroom at home can do the same.
Advantages 9: With matching limit clamp, the same height as the cross beam can be applied below the beam. Similarly, by holding the two levers that change the angle of the wiper with both hands to the bottom of the window, you can wipe the window below.
Advantage 10: The design of the wiper is wider than the fuselage, so the Yin Angle is easy to achieve, and the Yang Angle side is in place.